Hismart Grinding heating collector 4 circuits with thermal drives NC AC230V and flow meters

Floor heating collector 4 circuits with thermal actuators NC AC230V and flow meters. The set includes: A recessed metal box with a 4-circuit collector, flow meters, NC AC230V thermal actuators, and two drainage nodes.


Features:
The collector is used to control the water flow in heated floors. Each floor heating system pipe is connected to the collector, allowing for the regulation of water flow and heat quantity in each room of the building separately.
Electric thermal actuators are designed to control the heat distribution system of the heating equipment. They receive commands from automation devices (such as room thermostats or controllers) and regulate the distribution of water flow according to set parameters. With the help of thermal actuators, it is possible to accurately control the room temperature and reduce energy costs.
The state of the thermal actuators is NC (normally closed). The actuators work with programmable or non-programmable room thermostats that issue alternating current signals. Simple installation, thermal actuators are connected to the collector via a VA80 thread adapter. The valve thread adapter VA80 allows easy connection to the standard thread M30, securely locking it. The energy consumption of each actuator is only 2W.
Included flow meters (flow indicators) are designed for monitoring water flow and pressure balancing. Manual control heads (4 pcs) are also included.
The collector cabinet is mounted on the wall, recessed installation. The doors with a tongue are locked and open at approximately a 135-degree angle.


Technical specifications:
Collector cabinet:
Installation: recessed.
Dimensions: 640x530x118mm.
Depth: 110mm.
Door dimensions: 578mm x 475mm.
Number of flow meters: 4 pcs.
Number of thermal actuators: 4 pcs.
Drainage nodes: 2 pcs.
16mm pipe adapters for heating circuits: 4 pcs.
Color: light gray.

Thermal actuator:
Purpose: water heating system.
Type of operation of thermal actuators: NC (normally closed).
Operating voltage: AC 230V, 50/60Hz.
Starting current: max. 300mA.
Energy consumption: 2W.
Installation: connected to the collector via an adapter.
Adapter: VA 80.
Cable length: 90cm.
Operating temperature: 0°C~ +60°C.
Storage temperature: -25°C~ +65°C.
Operating humidity: < 80%RH (non-condensing).
Safety class: IP54.
Dimensions: Ø49.4mm x 56.6mm.


Warranty: 12 months.