Snapmaker laser module - Artisan & Ray - 40W

The Snapmaker laser module is our latest high-power diode laser accessory with an Air Assist system. Users can upgrade their printers to much more powerful desktop laser cutters using this powerful module.

Prevent charring, improve your work quality, and keep the laser lens clean. Air Assist can be controlled through Luban, so you won't need to manually turn this device on or off for different layers.

When performing both engraving and cutting in one job, it is not recommended to apply Air Assist to all layers. Therefore, Luban can allow Air Assist to be activated only in cutting layers, so you don't have to manually turn this feature on or off for different layers. A wide library of preset templates is provided, including common patterns, shapes, and icons, so you can create a design in minutes.

Calibrate the focus on the touchscreen by entering the material thickness and running the automatic focus or focus the laser using the focusing lever.

Reduce laser emissions. Together with the 2.0, Artisan, or Ray housing, the hazards posed by the laser can be reduced from Class 4 to Class 1.

Key features:

• 20 mm pine wood cutting in one pass
• 15 mm plywood cutting in one pass
• With Air Assist system (including Air Assist pump)
• Air Assist system can be controlled through Luban
• Built-in quick change mechanism
• Focusing laser with focusing lever
• Draw the work line with a crosshair
• Laser protective shield
• Orientation detection
• Overheating protection