Anycubic - Normal UV resin - Black - 1kg

Many users prefer Anycubic's standard UV resin because it ensures the strength of molded parts and does not shrink excessively, but also improves printing speed, shortens curing time, and maximizes the printing efficiency of LCD machines.

Features:

• Main material: resin monomer and photoinitiator
• UV wavelength 365-410nm
• Lower exposure time 20–60 sec., normal exposure time 5–15 sec.

Conventional UV resin

A strong material in a shovel model can easily cause the model to split, but a material that is too flexible will be prone to print stretch deformation or fracture, which will affect the accuracy and aesthetics of the casting. The resin is stable under various climatic conditions and is also easy to store, eliminating the shortcomings of other resins, which are easy to soften and cause environmental corrosion.

Professional LCD Casting Resin

The optimization of LCD low light source molding and printing efficiency are higher than the market compatible DLP/LCD/SLA resins. The resin is only for LCD resin model, not recommended for DLP or SLA machine. This resin ensures the rigidity of molded parts and not excessive shrinkage, but also improves the printing speed, shortens the curing time, and maximizes the printing efficiency of LCD machines.

Strong adhesion and easy to remove

Not only does it have a high printing success rate and accuracy, but it also reduces the resin release force and adhesion so that the model attached to the build platform can be easily scraped off, and the low viscosity makes it easier to clean the machine and model.

Storage method:

• Keep away from light sealants at room temperature (the sun has a lot of UV rays, it will harden the photosensitive resin. After the test, the light is not affected if it is not UV light).
• It is recommended to save at an ambient temperature of 15℃-35℃, the lower the temperature, the higher the viscosity of the resin. Tight storage space, too much dust or moisture may affect the printing quality. Sunshine has a lot of UV light, will solidify the photosensitive resin.

How to use:

1. Shake well before use, prohibiting the use of resin in areas with a lot of sunlight.
2. Wear gloves to avoid direct skin contact and ventilate the room before use.
3. Accidental contact, rinse with plenty of water as soon as possible. If you feel unwell, consult a doctor in time.
4. Printed models need to use high concentration alcohol to clean for about 30S (95% or more concentration is recommended, the higher the better).
5. Do not pour the resin in the resin tank into the unused resin, do not leave the resin unused for a long time, so that the resin pollution will not affect the printing effect (for a long time without resin, it can be poured into a sealed container or tightly sealed with plastic film to protect it).
6. The shelf life of the resin is up to 18 months.