Beany Zero 20 bicycle, blue

Beany Zero 20 is a light and sporty 20-inch children's bike, which is a sure and safe choice for a small rider to start cycling. Weighing only 7.5 kilograms, the Beany Zero 20 is one of the lightest in its size and price category. All its grips and dimensions are designed to meet the special needs of small children: clever frame geometry ensures an ergonomic and comfortable riding position, and the very low center of gravity makes the bike easy to control. The bike has reliable front and rear hand brakes suitable for small hands. Body geometry and grips suitable for children.

Technical information:

• Body Size: 10"
  
• Recommended rider height 105-125 cm
• Frame: Hydroformed double butted Aluminum 6061
  
• Saddle height at least 55 cm
  
• Fork: Beany alloy 6061
• Shifters: Microshift TS39-7R
  
• Shifter: MicroShift RD-21SS
  
• Gear set: Shimano 14-28T, 7 speed
• Crank set: Prowheel alloy 32T, 127 mm
• Chain: KMC
• Guide bearing: Feimin
• Handlebar: Solely.jr alloy
• Handlebar: Solely.jr alloy
• Front brake: Power alloy V-brake
• Rear brake: Power alloy V-brake
• Brake levers: alloy Alhonga 3 finger
• Front hub: Solely.jr alloy 24H
• Rear hub: Solely.jr alloy 24H
• Rim: Solely.jr alloy
• Tires: Innova 20 x 1.5"
• Maximum tire size: 20 x 2"
  
• Seat post: Solely.jr alloy 220 mm
  
• Saddle: Beany
• Pedals: Solely.jr
  
• Large permissible load: 70 kg
• Weight: 7.50 kg

The bike is delivered in the factory packaging, assembled almost ready to ride. If nothing else is stated for the bike, the level of stacking is 95%. With a few steps, you can get the bike ready to ride .

When installing the pedals, it is recommended to put grease or oil on the threads. You have to be careful that the left and right pedals go in the right direction. Start tightening with your fingers and only use the tool at the end. Tighten the pedals carefully.

Check the brake and gear adjustments before the first ride.

Small parts such as the clock and reflectors are generally loose, remember to install them for safe movement. Read more assembly tips.

We recommend that the bike is first serviced after 100-300 km of driving at a specialist bike service shop. If you have trouble getting the bike ready for riding , you should contact an expert bike service.

Product availability may vary. The manufacturer reserves the right to make changes regarding colors, materials, components, technical data and models. The degree of completion, components and technical data may vary for different production batches.

Degrees of stacking:

• 98% "ready to ride" - E tire ring , pedals and seat post are not installed. The handlebar bracket must be turned to the correct position and tightened. The gears and brakes are already adjusted at the factory.
• 95% - E tire, pedals, seat post and handlebar are not installed . Check the tightness of the bolts and nuts. The gear and brake adjustments are ready except for fine tuning.
• 90% - Front tire, pedals, seat post and handlebar are not installed. The fenders and possible body are not installed. Check the tightness of the bolts and nuts. The adjustments of the gears and brakes are probably not correct.