Produkta tonis un faktiskā krāsa var atšķirties no attēlā redzamā, jo attēli ir ilustratīvi. Produkta apraksts ir vispārīgs un, iespējams, tajā nav iekļautas visas produkta īpašības.
The DBC-4A charger can charge lead acid batteries (regular and MF), Ca/Ca, AGM and gel batteries. It is a microprocessor iron manufactured according to the IP65 standard, which means resistance to dust and splashes and low pressure water jetting. Has protection against: short circuit reverse battery connection (reverse polarity) open circuit protection against sparks battery overload charger overload charger has 6 charging modes: 6V to 14Ah batteries 7.2V to 2A 7.4V to 2A (charges at low temperature ) 12V to 14Ah batteries and deep discharge 14.3V to 2A 14.7V to 2A (low temperature charging) 12V batteries above 14Ah 14.3V to 4A 14.7V to 4A (low temperature charging) Displays battery voltage and charge level continuously and adjusts the charging current according to its needs. After charging, the FULL message is displayed and the battery voltage is maintained. Specification: Supply voltage 230V 50 Hz Output voltage: 6/12V Power consumption: about 60W (1W standby mode) Maximum charging voltage: 7.4V (for 6V batteries) 14.7V (for 12V batteries) Maximum charging current: 2A +/- 10 % 4A +/- 10% Supported battery capacities: 6V - 1.2Ah up to 14Ah 12V - 1.2Ah up to 14Ah and 14Ah up to 120Ah Degree of protection: IP65 6 charging programs, switched with the button "OPERATION MODE" screen backlight gel battery capacity up to 14Ah used in motorcycles and scooters must be loaded by selecting the program with the motorcycle icon on the screen. Charging at a higher current may damage the battery.
