Loading...

CATEGORIES
ARCTIC P8 PWM PST Value Pack - Pressure-optimised 80 mm Fan with PWM PST
ARCTIC P8 PWM PST Value Pack - Pressure-optimised 80 mm Fan with PWM PST
ARCTIC P8 PWM PST Value Pack - Pressure-optimised 80 mm Fan with PWM PST
ARCTIC P8 PWM PST Value Pack - Pressure-optimised 80 mm Fan with PWM PST
ARCTIC P8 PWM PST Value Pack - Pressure-optimised 80 mm Fan with PWM PST

The product's shade and actual color may differ from what is shown in the picture, as the images are for illustrative purposes. The product description is general and may not include all the product's features.

ARCTIC P8 PWM PST Value Pack - Pressure-optimised 80 mm Fan with PWM PST

94,81 €
Monthly payment from 3.34
692733

ACFAN00154A

4895213702072, 0872767009967

Shipping 3-5 b.d.

Pay 5x18.96€
Quantity
You are interested in this product?
(Read terms of service)

Optimised for Static Pressure

During the development of the new P8 PWM PST, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P8 PWM PST is particularly suitable for use on heatsinks and radiators.

Maximum Quietness, Minimum Vibration

Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable.
Due to a sinus-magnetizing the new motor only creates about 5 % of the vibration from commutation of a regular DC-motor without filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor.

Extended Life Span

A 10 °C lower motor temperature roughly doubles the life span of a fan.
The new ARCTIC motor has a four times longer service life through its low coil temperature.
Consequently, we have extended the warranty to 10 years.

200 to 3000 RPM regulated via PWM PST

Thanks to the 4-pin connector, the RPM can be regulated in a broad spectrum via PWM.
In this way, noise is kept at a minimum while maximum cooling performance is guaranteed when needed.

High Quality Bearing

Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.

Two Way Installation

Push warm air out of the case
Pull cool air into your case

Performance
Supported processor sockets Not supported
Type Fan
Fan diameter 8 cm
Airflow 40.3 m³/h
Maximum airflow 23.4 cfm
Maximum air pressure 1.9 mmH2O
Compatible processor series Not supported
Pulse-width modulation (PWM) support Yes
Rotational speed (min) 200 RPM
Rotational speed (max) 3000 RPM
Bearing type Fluid Dynamic Bearing (FDB)
Noise level 0.3 sone
Suitable location Computer case
Design
Product colour Black
Number of fans 5 fan(s)
Fan connector 4-pin
Number of fan blades 5
Power
Voltage 12 V
Weight & dimensions
Weight 81 g
Package weight 463 g
Height 80 mm
Width 80 mm
Depth 25 mm
Cable length 0.4 m
Package height 89 mm
Package width 127 mm
Package depth 86 mm
Packaging content
Screws included Yes
Number of screws 4
Package type Box
Manual Yes
Other features
Country of origin China
Mounting hole pattern (W x D) 71.5 x 71.5 mm
30 other products in the same category: